1-15 | 16-30 | 31-45 | 46-60 | 61-75 | 76-90 | 91-105 | 106-120 | 121-135 | 136-150

  46. Samovar “Oval vase with the demountable base/ash-shut ”, "FLASK" ÐÓÑ  ENG  
Samovar “Oval vase with the demountable base/ash-shut ”, "FLASK", nickel-plated brass. Collection. Antique.
Manufacturer: trademark on the crane’s horn «N.K. ».
Manufacturing time: ~second - third quarter of XIX century.
Body – of oval form.
Choke –– simple configuration with wooden round knob on its post.
Crown – of complicated form, with round cuttings.
Cover – punched, simple form of hip with two round wooden knobs on their posts and steam exhaust valve.
Round – round, smooth.
Holders – two, curved metallic strips with into curved edges, each brazing to the body in two places.
Crane – cast simple form with small horn and cone key and with figured flat vertical handle (branch).
Ash-pit – part of the base, with patterned openwork cuttings.
Base – demountable bottom part of a samovar with ash-pit and the convex bottom as ash-shut by design.
Legs – four, metal strips with bent into edges, curved as letter “S”, soldered to the bottom of the base.
Stuff, technique: nickel – plated brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 3 litters.
Height: 400 mm. Width: 280 mm.
Restoration: there is no necessity.
Status: 9 marks.
  47. Samovar “Vase a in a form of fragmented wine-glass with front mirror”, “BYZANTIAN WINE-GLASS” ÐÓÑ  ENG  
Samovar “Vase a in a form of fragmented wine-glass with front mirror”, “BYZANTIAN WINE-GLASS”, brass. Collection. Antique.
Manufacturer: trademark on a cover « the Arms with portrayal of two-headed eagle - an inscription lower - « Charter approved by Imperator on April 10th, 1898 » - lower – two prints of one medal with an inscription: « bronze 1870 » - an inscription - « COMPANY STEAM SAMOVAR FACTORIES of SUCCESSORS of V.S.BATASHEV in TULA», two prints of one medal with an inscription: «gold 1882».
The second trademark on a cover - « Nickelizing by V.S.Batashev's legatees of company factory».
The third trademark - «1é (first) sort».
Manufacturing time: ~ last quarter of XIX century.
Body – form of fragmented wine-glass with interception in the top part and with front mirror.
Choke – simple configuration with wooden round knob on its post.
Crown – of complicated form, with patterned cuttings.
Cover – punched, simple form with two round wooden knobs on their posts and steam exhaust valve.
Round – round, smooth.
Holders – cast, two Byzantian vertical patterned, each consists of two brass holders (upper and lower) and figure wooden handle between them on tacks with four screw-nuts fastened endings of tacks. Four platforms of two holders are brazing to the body.
Crane – cast , of the simple form, with a cone key and openwork handle, with wooden quick.
Ash-pit – as round cuttings on the upper part of the post of the base.
Base – cast, in a form of round hip with narrowed in the middle post.
Legs – four openwork legs, bottom part of the base.
Ash-shut – is absent.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 2,5 litters.
Height: 375 mm. Width: 250 mm.
Restoration: there is no necessity.
Status: 10 marks.
  48. Samovar “Vase a in a form of fragmented wine-glass with front mirror”, “KEROSENE BYZANTIAN WINE-GLASS” ÐÓÑ  ENG  
Samovar “Vase a in a form of fragmented wine-glass with front mirror”, “KEROSENE BYZANTIAN WINE-GLASS”, brass. “Component part of collection branch - kerosene samovars”. Collection. Antique.
Manufacturer: trademark on a cover « the Arms with portrayal of two-headed eagle - an inscription lower - « Charter approved by Imperator on April 10th, 1898 » lower – two prints of one medal with an inscription: « bronze 1870 » - an inscription - « COMPANY STEAM SAMOVAR FACTORIES of SUCCESSORS V.S.BATASHEV in TULA», two prints of one medal with an inscription: «gold 1882».
The second trademark on a cover - « Nickel-plating by V.S.Batashev's successors of company factory».
Manufacturing time: ~ last quarter of XIX century.
Body – form of fragmented wine-glass with interception in the top part and with front mirror. Bayoneted to the upper part of the post of the base. An inspection window with oven-door plate is mounted at the bottom of the body.
Choke – simple configuration with wooden round knob on its post.
Crown – of complicated form, with patterned cuttings.
Cover – punched, simple form with two round wooden knobs on their posts and steam exhaust valve.
Round – round, smooth.
Holders – cast, two Byzantian vertical patterned, each consists of two brass holders (upper and lower) and figure wooden handle between them on tacks with four screw-nuts fastened endings of tacks. Four platforms of two holders are brazing to the body.
Crane – cast , of the simple form, with a cone key and openwork handle, with wooden quick.
Ash-pit – as vertical strips cuttings on the upper part of the post of the base.
Base – cast, in a form of round capacity for kerosene with fuse without a drainage aperture and high cylindrical post. On the bottom of the base printed trademark: “Save ¹ 54739 certificate”.
The post has two vertical slits with short horizontal cuttings and two handles of the flame adjusting mechanism.
Legs – four openwork legs, bottom part of the base.
Ash-shut –no by design.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wick, wood turning and cutting.
Capacity: ~ 2,5 litters.
Height: 420 mm. Width: 250 mm.
Restoration: there is no necessity.
Status: 10 marks.
  49. Samovar “Vase in a form of sphere shares”, "WATER-MELON" ÐÓÑ  ENG  
Samovar “Vase in a form of sphere shares”, "WATER-MELON", brass. Collection. Antique.
Manufacturer: trademark on a cover: the image of a medal - “STEAM SAMOVAR FACTORY of SUCCESSORS of P.N.FOMIN“ - the image of a medal.
Manufacturing time: ~second - third quarter of XIX century.
Body – in a form of segmented sphere.
Choke – simple configuration with wooden round knob on its post.
Crown – of complicated form, with patterned cuttings.
Cover – punched, simple form with two round wooden knobs on their posts and steam exhaust valve.
Round – simple, smooth.
Holders – cast, four, openwork – “dolphins” with the ridge platforms brazing to the body, hold two cylindrical wooden handles on tacks, strapped on their endings by four screw-nuts.
Crane –cast, simple form, with a cone key and openwork handle with wooden quick.
Ah-pit – patterned cuttings, on the upper part of the post of the base.
Base – cast, square, patterned, with rectangular lugs on each side.
Legs – lower part of the base, patterned, a little lugs forward.
Ash-shut – round cover with catch, fastened by small hinge on the bottom of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 5 litters.
Height: 420 mm. Width: 300 mm.
Restoration: there is no necessity.
Status: 9 marks.
  50. Samovar “Vase in a form of smooth wine-glass with medals”, “PEASANT” ÐÓÑ  ENG  
Samovar “Vase in a form of smooth wine-glass with medals”, “PEASANT”, brass. Collection. Antique.
Manufacturer: rubbed trademark on a cover «FACTORY B.G.TEILE - lower - the image of a medal with an inscription: « ALEX. III imp.(erator) all-Russ.» - the trade mark: the GUN - a back of a medal with an inscription: « … all-Russian 1882».
On a face sheet 0f the body: « FACTORY of TRADING HOUSE B.G. TEILE with sons in ÒULA» - a brand and ten double images of medals, a brand of the image of a medal with an inscription: « the award, 1904 ».
Manufacturing time: ~ beginning of XX century.
Body – in a form of smooth wine-glass with medals and with interception in the top part.
Choke – simple configuration with wooden round knob on its post.
Crown – of complicated form, with patterned cuttings.
Cover – punched, simple form with two round wooden knobs on their posts and steam exhaust valve.
Round – simple, smooth.
Holders – cast, two, lateral, with the ridge platforms and four vertical bent horns hold two cylindrical wooden handles on tacks, strapped on their endings by four screw-nuts.
Crane –cast as a head of a monster, with a cone key and openwork handle with wooden quick.
Ah-pit – patterned cuttings, the same as the crown has, on the upper part of the post of the base.
Base – cast, round, in a form of a hip.
Legs – lower part of the base, patterned in a form of hoofs, a little lug forward.
Ash-shut – round cover with catch, fastened by small hinge on the bottom of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 10 litters.
Height: 580 mm. Width: 430 mm.
Restoration: there is no necessity.
Status: 10 marks.
  51. Samovar “Vase (Vessel for fault) in a form of Sphere”, "ENGLISH" ÐÓÑ  ENG  
Samovar “Vase (Vessel for fault) in a form of Sphere”, "ENGLISH", copper . Collection. Antique.
Manufacturer: trademark on a cover from the inside: «BEST LONDON MANUFAC».
Manufacturing time: the second ~ third quarter of XIX century.
Body – of standard samovar sphere with a ornamented belt is little bit higher than places of fastening of handles.
Choke – no by design.
Crown – no by design.
Cover – punched, simple form with minted round ornament and patterned metallic round knob on its post. Several round holes are made for thermo regulation and situated under patterned metallic round knob.
Round – simple, smooth.
Holders – cast, four, curved in form of letter “S” like a horn up, decorated by tendrils brazing to the body and with two figure ivory round handles, each between two horns, and on two tacks fastened by its endings riveted.
Crane – cast, patterned with with longitudinal strips and cast tendrils and with forward-rear moving figure shaft-bow and ivory cylindrical quick in the middle of bow.
Ash-pit – no by design.
Base – punched, square with high narrowed in the middle part post.
Legs – four, in form of spheres.
Ash-shut – no by design.
Stuff, technique: copper, inner tinning, ornamented mints, chasing, caulking, punching, soldering, brazing, assembling; ivory turning and cutting.
Capacity: ~ 7,5 litters.
Height: 430 mm. Width: 340 mm.
Restoration: there is no necessity.
Status: 9 marks.
  52. Samovar “Vase in a form of segmented sphere”, “LARGE WATER-MELON ” ÐÓÑ  ENG  
Samovar “Vase in a form of segmented sphere”, “LARGE WATER-MELON ”, brass. Collection. Antique.
Manufacturer: trademark on a cover: the Russian arms - is lower an inscription - « Charter approved by Imperator on April 10th, 1898 » - lower - two images of one medal with an inscription above:-"Bronze" - on a circle of one: « All-Russian Ìànuf … 1870 » - in the centre of a medal « BASIL. and ALE.. BATASH… ÑÚÅÐ.. » And on the second « ALEXAN.II. IMPERÀÒ. And TSAR of ALL-RUSSIA» - under them - "1870" - in the center under the arms a brand: « COMPANY STEAM SAMOVAR FACTORY of SUCCESSORS V.S. BATASHEV in ÒULA»- on the right - two images of a medal - from above: "GOLD" - on a circle of the first image of a medal an inscription: « ALEXANDER III. IMPERÀÒ. of ALL-RUSSIA» - an inscription on the second image: « EXHIBITION - further it is illegible - under images of a medal - "1882". More to the left of a steam exhaust valve a brand in an oval: «NICKEL-PLATING by COMPANY FACTORY of SUCCESSORS of V.S.BATASHEV», on the right: «1st sort».
Manufacturing time: ~ last quarter of XIX century.
Body – of standard samovar’s vase in a segmented sphere form.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings.
Cover – simple form with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders – cast, two in a form of vertical horns with a platform of each brazing to the body by it, with two wooden round handles, each between two horns of one holder and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, simple form with a spout in a form of high boot, with cone key and patterned figure handle (also called – branch) with wooden round knob on its post.
Ash-pit – with patterned cuttings, the same as on the crown.
Base – cast, round, standard form of a hip.
Legs – patterned four, lower part of the base, a little lugs forward.
Ash-shut – round cover fastened by small hinge to the lower part of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, tinning, assembling; wood turning and cutting.
Capacity: ~ 7,5 litters.
Height: 480 mm. Width: 380 mm.
Restoration: there is no necessity.
Status: 9 marks.
  53. Samovar “Sphere vase with double ash-pit”, “DOUBLED ASH-PIT” ÐÓÑ  ENG  
Samovar “Sphere vase with double ash-pit”, “DOUBLED ASH-PIT”, brass. Collection. Antique.
Manufacturer: rubbed trademark on a cover( difficult to read).
Manufacturing time: ~ the second - third quarter of XIX century.
Body – of standard samovar’s sphere vase.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings.
Cover – simple form, with high convex bulged neck, with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders – cast, two in a form of vertical horns with a platform of each brazing to the body by it, with two wooden round handles, each between two horns of one holder and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, simple form with a spout in a form of high boot, with cone key and patterned figure handle (also called – branch) with wooden round knob on its post.
Ash-pit – double, each with patterned cuttings.
Base – cast, square, standard form.
Legs – patterned four, lower part of the base, a little lugs forward.
Ash-shut – is absent.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, tinning, assembling; wood turning and cutting.
Capacity: ~ 5 litters.
Height: 430 mm. Width: 325 mm.
Restoration: internal tinning, polishing.
Status: 7 marks.
  54. Samovar “Smooth sphere vase”, “SMOOTH SPHERE VASE” ÐÓÑ  ENG  
Samovar “Smooth sphere vase”, “SMOOTH SPHERE VASE”, brass. Collection. Antique.
Manufacturer: trademark on a cover: the Russian arms - is lower an inscription - « Charter approved by Imperator on April 10th, 1898 » - lower - two images of one medal with an inscription above: - "Bronze" - on a circle of one: « All-Russian Ìànuf … 1870 » - in the centre of a medal « BASIL. and ALE.. BATASH… ÑÚÅÐ.. » And on the second « ALEXAN.II. IMPERÀÒ. And TSAR of ALL-RUSSIA» - under them - "1870" - in the center under the arms a brand: « COMPANY STEAM SAMOVAR FACTORY of SUCCESSORS of V.S. BATASHEV in ÒULA»- on the right - two images of a medal - from above: "GOLD" - on a circle of the first image of a medal an inscription: « ALEXANDER III. IMPERÀÒ. of ALL-RUSSIA» - an inscription on the second image: « EXHIBITION - further it is illegible - under images of a medal - "1882". More to the left of a steam exhaust valve a brand in an oval: « NICKEL-PLATING by COMPANY FACTORY of SUCCESSORS of V.S.BATASHEV», on the right: «1st sort».
Manufacturing time: ~ last quarter of XIX century.
Body – of standard samovar’s sphere vase.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings.
Cover – simple form with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders – cast, two in a form of vertical horns, curved as letter “S”, with a platform of each brazing to the body by it, with two wooden round handles, each between two horns of one holder and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, simple form with a spout in a form of high boot, with cone key and patterned figure handle (also called – branch) with wooden round knob on its post.
Ash-pit – with patterned cuttings, the same as on the crown.
Base – cast, round in a form of hip, standard form.
Legs – patterned four, lower part of the base, a little lugs forward.
Ash-shut – is absent.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, tinning, assembling; wood turning and cutting.
Capacity: ~ 6 litters.
Height: 420 mm. Width: 315 mm.
Restoration: there is no necessity.
Status: 7 marks.
  55. Samovar “Vase in a form of saucepan”, “SHAPOSHNIKOV’s SAUCEPAN” ÐÓÑ  ENG  
Samovar “Vase in a form of saucepan”, “SHAPOSHNIKOV’s SAUCEPAN”, brass. “Component part of collection branch - SAUCEPANS”. Collection. Antique.
Manufacturer: trademark on a face side of the body: three round stamp - on the first: « FACTORY of SUCCESSORS of SHAPOSHNIKOV in KIRJACH »; on the second: - in a circle the image of a factory; on the third - a brand : «SUCCESSORS of SHAPOSHNIKOV in MOSCOW».
Manufacturing time: ~ third quarter of XIX century.
Body – standard samovar saucepan.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings.
Cover – simple form with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders – four, curved in a form of letter “S”, each with platform brazing to the body, with two round wooden handles between two holders, on the tacks fastened by four screw-nuts at endings of the tacks.
Crane – cast, simple form with a spout in a form of high boot, with cone key and flat vertical openwork handle.
Ash-pit – with patterned cuttings, the same as on the crown.
Base – cast, round in a form of hip, standard form.
Legs – patterned four, lower part of the base, a little lugs forward.
Ash-shut – round cover with catch, fastened by small hinge on the bottom of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 2,5 litters.
Height: 370 mm. Width: 300 mm.
Restoration: there is no necessity.
Status: 8 marks.
  56. Samovar “Vase in a form of small pear”, “SMALL PEAR” ÐÓÑ  ENG  
Samovar “Vase in a form of small pear”, “SMALL PEAR”, brass. Collection. Antique.
Manufacturer: trademark on a cover: « FÔ. âú ÒÓËÚ », the arms similar on State Russian, but with the image of two geese, with the bound necks, - lower – ÁÀËÀØÎÂÛÕ (BALASHOV’s) at the left in a circle: ~ « ON ÎÐÓÆÅÉÍÍ. », on the right in a circle: "ÑÒÀÐÎÍÅ".
Manufacturing time: ~the second - third quarter of XIX century.
Body – in a form of standard samovar pear.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings.
Cover – simple form with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders – cast, two in a form of vertical horns, curved as letter “S”, with a platform of each brazing to the body by it, with two wooden round handles, each between two horns of one holder and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, simple form with a spout in a form of high boot, with cone key and patterned figure handle (also called – branch) with wooden round knob on its post.
Ash-pit – with patterned cuttings, the same as on the crown.
Base – cast, square, standard form.
Legs – patterned four, lower part of the base, a little lugs forward.
Ash-shut – round cover with catch, fastened by small hinge on the bottom of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 2,5 litters.
Height: 335 mm. Width: 280 mm.
Restoration: there is no necessity.
Status: 8 marks.
  57. Samovar “Vase in a form of fragmented pot, with medallions”, “PARICHKO’s POT” ÐÓÑ  ENG  
Samovar “Vase in a form of fragmented pot, with medallions”, “PARICHKO’s POT”, brass. Collection. Antique.
Manufacturer: trademark on the cover - « Ñàìîâàð «ÏÀÐÈ×Êλ åäèíñòâåííîå ïðîèçâîäñòâî ïàðîâîé ñàìîâàðíîé ôàáðèêè òîâàðèùåñòâà Áð. ØÀÕÄÀÒÚ è Êî â Òóëú», «Samovar of “Parichko” – sole manufacture of steamer samovar factory of company SHAKHDAT Brothers & Co in TULA».
On an obverse mirror the inscription is engraved: «In a sign for sympathetic attitude from Company of holders of steamship bars of N.Novgorod''s to Michael Georgievichu Storozhev 19-15/III-09».
Manufacturing time: ~ the very beginning of XX century.
Body – in a form of fragmented pot, with medallions and large front medallion (also called – mirror) with interception in the top part.
Choke – simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings and with two windows for draught.
Cover – simple form with two wooden round knobs on their posts and a brass steam exhaust valve.
Round - simple and smooth.
Holders - two with four vertical horns and patterned platform of each brazing to the body, with two figure wooden round handles, each between two horns, and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, simple form, with cone key and flat vertical figure handle (also called – branch) with wooden round knob above.
Ash-pit – by construction situated on the crown has two windows for draught.
Base – cast, round, standard form of a hip.
Legs – patterned four, a little lugs forward.
Ash-shut – none by design.
Special features of design: samovars body is a simple bucket, the heating container with firing fuel (coal, small wooden pieces) the whole with the cover put into water poured into body, and fastened on it by bayonet junction.
Stuff, technique: ëàòóíü, ïîëèðîâêà, âûêîëîòêà, øòàìï, ïàéêà, ìîíòèðîâêà; äåðåâî, òî÷åíèå; æåñòü, ïîëóäà.
Capacity: ~ 5,5 litters.
Height: 450 mm. Width: 310 mm
Restoration: inner tinning, polish.
Status: 8 marks.
  58. Samovar “Travelling (picnic) samovar”, “DEMIDOV’s” ÐÓÑ  ENG  
Samovar “Travelling (picnic) samovar”, “DEMIDOV’s”, copper, with demountable legs.
Collection. Antique.
Manufacturer: trademark is unknown, the brand is absent - at that time samovars did not any brand.
Manufacturing time: ~ third – last quarter of XVIII century.
Body – the form of the high octahedron extended along one axis (to four big - the basic sides and with four small lateral). Samovar called “DEMIDOV’s” in honour of Akinfy Demidov – Tula’s master, the first founder of several Ural factories.
Choke –– simple configuration with wooden round knob on its post.
Crown – figure form with patterned cuttings, untouchable from the cover.
Cover – simple form with two wooden round knobs on their posts.
Round - simple and smooth.
Holders – cast, two, in a form of women ear-rings, joined with platform by hinge. Platform is brazing to the body, with two round wooden handle on their tacks, riveted at endings of them.
Crane – cast, simple form, with cone key and flat vertical figure handle, broken a little.
Ash-pit – cuttings on the ash-shut.
Base – no by design.
Legs – four, cast, curved as letter “S”, fastened to the body in special grooves of soldered rectangular holders, riveted to the body.
Ash-shut – demountable, punchedá bayoneted in a form of a flat hat with its crown downwards, fastens to the bottom part of the body by hat’s brim in grooves between a surface of the body and four legs.
Stuff, technique: copper, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 4,5 litters.
Height: 390 mm. Width: 215 mm.
Restoration: there is no necessity.
Status: 10 marks.
  59. Samovar “Vase, rolling madein”, “ROLLING MADE” ÐÓÑ  ENG  
Samovar “Vase, rolling madein”, “ROLLING MADE”, nickel-plated. In “ the Price-list of company steam samovar factory of successors of V.S.Batashev in Òula ” the same samovar is located under ¹ 31”.Collection. Antique.
Manufacturer: trademark on a cover: “the Arms of Russia - lower – « Charter approved by Imperator on April 10th, 1898 ». Below - two images of a bronze medal of Alexander II from 1870ã. - an inscription: “Company of steam samovar factory of of SUCCESSORS of Vasily Stepanovich BATASHEV in Tula” - more to the right - two images of a gold medal of Alexander III from 1882ã. On other party(side) to a cover in an oval an inscription: ”Nickel-plated by company of factory of successors of V.S.Batashev ” and near a brand: “ 1st sort”.
Trademark on a face side of the body - « Charter approved by Imperator on April 10th, 1898 », “Company of steam samovar factory of SUCCESSORS of V.S.BATASHEV in Tula”.Manufacturing time: ~ last quarter of XIX century. Probably, the beginning of XX century.
Body – in a form of vertical rhombus, on which perimeter of a circle concave-convex shares.
Choke – simple configuration with wooden round knob on its post.
Crown – cast, figure form with patterned cuttings and with patterned upper ring.
Cover – simple form with two wooden round knobs on their posts and a steam exhaust valve.
Round - cast, figure and patterned.
Holders - two with four vertical horns and patterned platform of each brazing to the body, with two figure wooden round handles, each between two horns, and on two tacks fastened by four figure screw-nuts on endings of tacks.
Crane – cast, patterned form, with cone key and flat vertical figure handle with cast lives and acorns, with wooden round knob above.
Ash-pit – with patterned cuttings, the same as on the crown.
Base – cast, square, with square rectangular lug a little forward on each side of the base.
Legs – patterned four, lower part of the base, a little lug forward.
Ash-shut – round cover with catch, fastened by small hinge on the bottom of the base.
Stuff, technique: nickel – plated brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; wood turning and cutting.
Capacity: ~ 10 litters.
Height: 550 mm. Width: 385 mm.
Restoration: there is no necessity.
Status: 9 marks.
  60. Samovar “SBITENNIK” ÐÓÑ  ENG  
Samovar “SBITENNIK”, brass. Device was used to prepare – an ancient Russian drink – sbiten. Collection. Antique.
Manufacturer: trademark on a cover (a manual engraving): « Âú ÒÓËÚ ÁÐÀÒÜß ËßËÈÍÛ (èëè ÏÀÍÈÍÛ) ». «In TULA BROTHERS LIALIN (or PANIN)”.
Brand on handles: "ß.×", a brand on a spout of the crane: "ß.×", a brand on choke: «¹ 2 ».
Manufacturing time: ~ last quarter of XVIII century. Possible, the beginning of XIX century/
Body – in a sphere form. Detachable from the base.
Choke – simple form of a hip, with metallic knob on its post.
Crown – no by design.
Cover – punched, with curved down edges and with two round ivory knobs on their posts.
Round – no.
Holders – two, cast, brass, curved fastening wooden round handle by two cored clutches. Holders are situated in a front – rear of samovar position and each submitted by hinge to join with flat platforms are riveted to the upper part of the body.
Crane – cast, in the form of the letter "S", the bird's beak doubled across on the spout ending.
Ash-pit – patterned cuttings on the base.
Base – in a form of hip with bottom, which is also ash-shut, on the upper part the body is mounted.
Legs – cast, three. Soldered to the bottom of the base.
Stuff, technique: brass, chasing, caulking, punching, soldering, brazing, inner tinning, assembling; ivory and wood turning and cutting.
Capacity: ~ 4 litters.
Height: 330 mm., with handle up: 400mm. Width: 200 mm.
Restoration: there is no necessity.
Status: 9 marks.
1-15 | 16-30 | 31-45 | 46-60 | 61-75 | 76-90 | 91-105 | 106-120 | 121-135 | 136-150